Cisco 7513 Replacement Instructions Manual

Also see for 7513 Series: Configuration guide Datasheet Quick start guide Replacement instructions Hardware installation and maintenance manual

1Doc. No.Copyright © 1995Cisco Systems, Inc.All rights reserved.Cisco 7513 Card Cage and Backplane AssemblyReplacement Instructions78-1895-01Product Number MAS-7513CDCAGE=The card cage and backplane assembly for the Cisco 7513 chassis can be replaced in the field.Note The card cage and backplane assembly is a single field-replaceable unit (FRU) that requiresreplacement by a Cisco-certified service provider only. This document assumes you have alreadyperformed troubleshooting on your chassis and system; therefore, this replacement procedure isindicated.This document discusses the procedures required to replace the card cage assembly, and includes thefollowing sections:• Product Overview, page 2• Installation Safety, ESD Precautions, and Tools Required, page 3• Removing a Power Supply, page 9• Removing and Replacing the Card Cage and Backplane Assembly, page 12• Replacing a Power Supply, page 14• Checking the System, page 14• Cisco Information Online, page 17Caution Before replacing the card cage and backplane assembly, read the section “SafetyGuidelines” on page 3. The specific procedures for removing and installing the card cage andbackplane assembly might require two people to perform.