Cisco 700 Series Quick Start Manual

Also see for 700 series: Administration guide Installation and upgrade guide Installation guide Overview Configuration guide

Contents

Corporate Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USACopyright © 1999. Cisco Systems, Inc. All rights reserved.Cisco 700 Series Router Cabling and SetupQuick Start GuideThis document describes the basic process of cabling and configuring the Internet access device, theCisco 700 series router. For advanced cabling information, refer to the Cisco 700 Series RouterInstallation Guide. For advanced configuration information, refer to the Cisco 700 Series RouterCommand Reference and the Cisco 700 Series Router Software Configuration Guide. These documents canbe found on the Cisco Documentation CD-ROM and Cisco Connection Online (CCO).Parts List• One Cisco 700 series router• One yellow Ethernet cable• One red ISDN U cable (Cisco 776 routers only)• One orange ISDN S/T cable (Cisco 761 and 775 routers only)• One RJ-45-to-RJ-11 adapter• One blue config cable• One black power supply• One black power supply cord• One Cisco Fast Step CD-ROMNote Additional parts might be required to install Cisco775 and Cisco 776 routers. An Ethernetcrossover cable must be used to connect a hub to the router. Depending on the country, youmight need a phone port adapter to connect an analog telephone. These parts must beprovided by the user.