Cisco 2800 Series Quick Start Manual

Also see for 2800 Series: Datasheet Hardware installation guide Guide Guide Application note

Contents

Corporate Headquarters:Copyright © 2001. Cisco Systems, Inc. All rights reserved.Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USACisco 800 Series Router Cabling and SetupQuick Start GuideThis document describes the basic process of cabling and configuring the Internet access device, theCisco 800 series router. For advanced cabling information, refer to the Cisco 800 Series Router HardwareInstallation Guide. For advanced configuration information, refer to the Cisco 800 Series Router SoftwareConfiguration Guide. These documents are available on the Cisco Documentation CD-ROM and on theWorld Wide Web.You can access the most current Cisco documentation on the World Wide Web at the following sites:• http://www.cisco.com• http://www-china.cisco.com• http://www-europe.cisco.comParts ListThe shipment of your Cisco 800 series router includes the following items:• One Cisco 800 series router• One yellow Ethernet cable• One orange ISDN S/T cable (Cisco 801 and Cisco 803 only)• One red ISDN U cable (Cisco 802 and Cisco 804 only)• One RJ-45-to-RJ-11 adapter cable (for use with the red ISDN U cable)• One blue console cable• One DB-9-to-RJ-45 adapter (for use with the blue console cable)• One DB-25-to-RJ-45 adapter (for use with the blue console cable)• One black power supply• One black power supply cord• 800 and SOHO Series Product Documentation CD• Cisco 800 Fast Step CD-ROM