Cisco Unified IP Phone Wall Mount• Wall Mount Components for Cisco Unified IP Phone 6901, on page 1• Wall Mount Components for Cisco Unified IP Phone 6911, on page 4• Adjust Handset Rest, on page 9Wall Mount Components for Cisco Unified IP Phone 6901The following section describes how to install the Wall Mount plate for use with the Cisco Unified IP Phone6901.Cisco recommends that you use the Leviton Wall Mount plate (Leviton type number: 4108W-0SP) for mountingthe Cisco Unified IP Phone 6901. The wall mount plate must be ordered separately from the phone.The following figure and table show a list of items required to mount the Cisco Unified IP Phone 6901 on thewall using the Leviton Wall Mount plate.Figure 1: Leviton Wall Mount plateLeviton Wall Mount Plate2RJ45 Connector1Cisco Unified IP Phone Wall Mount1