Cisco 3800 series User Manual

Also see for 3600 Series: Configuration guide Hardware installation guide Manual Product overview Upgrade instructions

Contents

Password Recovery Procedure for the Cisco 3600and 3800 Series RoutersDocument ID: 22189ContentsIntroductionPrerequisitesRequirementsComponents UsedRelated ProductsConventionsStep−by−Step ProcedureExample of Password Recovery ProcedureRelated InformationIntroductionThis document describes how to recover the enable password and the enable secret passwords. Thesepasswords protect access to privileged EXEC and configuration modes. The enable password password canbe recovered, but the enable secret password is encrypted and must be replaced with a new password. Use theprocedure described in this document in order to replace the enable secret password.PrerequisitesRequirementsThere are no specific requirements for this document.Components UsedThe information in this document is based on these hardware versions:Cisco 3600 Series Router•Cisco 3800 Series Router•The information in this document was created from the devices in a specific lab environment. All of thedevices used in this document started with a cleared (default) configuration. If your network is live, make surethat you understand the potential impact of any command.Related ProductsRefer to Password Recovery Procedures for information on how to recover passwords for related products.ConventionsRefer to Cisco Technical Tips Conventions for information on document conventions.