CAPINTEC, INC CAPTUS® 2000When the cursor is located within a text box it will change to a thin vertical "I-beam." Notethat actually having the ability to input or edit requires that you click the trackball button tocause the edit cursor, a bold blinking vertical line, to appear.Figure 3-1Command ButtonThe most common control in the CAPTUS® 2000 is the command button. An example of acommand button is shown in Figure 3-1. A command button can be activated in one of threeways:1. positioning the pointing device over the button and clicking the pointing device's leftbutton once,2. using the Tab key on the keyboard to move the high light from control to control untilthe desired control is highlighted, then press the Enter key, or3. holding down the Alt key and pressing the letter in the command button caption whichis underlined. (in Figure 3-1 this would be Alt-C).3-2 GENERAL OPERATING INSTRUCTIONS July 00
