CanyCom BP416 Operator's Manual

CanyCom BP416 Operator's Manual Manual pdf 37 page image

– 32 –MaintenanceBrake wireLocknutAdjustment nutClutch wire7.7.2 Clutch1. Move the drive clutch lever to the "STOP" (lowerside) position to release the clutch wire.2. Loosen the clutch wire lock nut.3. Turn the adjustment nut to adjust the clutch wire.If the disengagement of the running clutch is dif-ficult, turn the adjustment nut in direction (B).If the V-belt slips, turn the adjustment nut indirection (A).4. After the adjustment, tighten the lock nut firmly.(BP416)Brake adjuster ELock nutAdjustment nutBrake adjuster CLock nutAdjustment nut7.7.3 BrakeProper brake performance is critical for safety.Always keep brakes adjusted for maximumperformance.NOTICE1. Move the drive clutch lever to the "RUN" position todisengage the brake.2. Loosen the lock nut for the brake adjuster C.3. Turn the adjustment nut to adjust the brake adjuster.When the effectiveness of the brake is poor.Turn the adjustment nut in D direction.4. After the adjustment, tighten the lock nut firmly.When the effectiveness of the brake is not sufficienteven after the adjustment above.5. Loosen the lock nut for the brake adjuster E.6. Turn the adjustment nut in F direction for adjust-ment.7. After the adjustment, tighten the lock nut firmly.(BP415)