1-2. Customer Maintenance1-3. Special ToolsAdjustment Timing Purpose Tool Approx.timeManual print headalignment- At print head replacement- When print quality is not satisfying (unevenprinting, etc.)To ensure accurate dotplacement.- Machinebuttons- Computer (MPdriver)10 min.Print head cleaning When print quality is not satisfying. To improve nozzle conditions. - Machinebuttons- Computer (MPdriver)1 min.Print head deepcleaningWhen print quality is not satisfying, and notimproved by print head cleaning.To improve nozzle conditions. - Machinebuttons- Computer (MPdriver)2 min.Ink tank replacement When an ink tank becomes empty. ("No inkerror" displayed on the monitor or on themachine LCD, or short flashing of an ink tankLED)To replace the empty ink tank. --- 1 min.Paper feed rollercleaning- When paper does not feed properly.- When the front side of the paper is smeared.To clean the paper feed rollersof the selected paper source(rear tray or cassette).- Machinebuttons- Computer (MPdriver)2 min.Bottom plate cleaning When the back side of the paper is smeared. To clean the platen ribs. (Feedthe paper from the rear tray.)- Machinebuttons- Computer (MPdriver)1 min.Scanning area cleaning When the platen glass or document pressuresheet is dirty.To clean the platen glass andpressure sheet.Soft, dry, andclean lint-freecloth.1 min.Exterior cleaning When necessary To clean the machine exterior,or to wipe off dusts.Soft, dry, andclean lint-freecloth.1 min.LAN resetting When changing the network setting, etc. To return the LAN setting toits original state.- Machinebuttons- Computer (MPdriver)1 min.Wired / Wireless LANsetting informationdisplayWhen changing the network setting, etc. To confirm the LAN settinginformation.- Machinebuttons- Computer (MPdriver)1 min.Name Tool No. Application RemarksFLOIL KG-107A QY9-0057-000 To the carriage rail sliding portions, and Easy-Scroll Wheelbase.In common with the MP610,etc.3 / 44