Canon mp628 Service Manual

Also see for PIXMA MP620 series: Supplementary guide On-screen manual Manual Manual Manual

Contents

Canon mp628 Service Manual Manual pdf 11 page image

2-3. Other Error Messagesswitch area;remove foreign material.(2) Part replacement:- Purge drive system unit- ASF unit22 times Scanner error [5011] An error occurred in the scanner. (1) Document pressure sheet conditions(2) Cable connection(3) Part replacement:- Document pressure sheet (spongesheet)- Scanner unit- Logic boardFlatbed motor error [5012] An error occurred in the scannerflatbed motor.(1) Cable connection(2) Part replacement:- Scanner unit23 times Valve cam sensorerror[6C10] The valve cam sensor was faulty atpower-on or when purging wasattempted.(1) Foreign material or paper debris around thepurge drive system unit;remove foreign material.(2) Cable connection(3) Part replacement:- Purge drive system unit- Logic boardBefore replacement of the logic board ass'y, check the ink absorber counter value (by service test print or EEPROMinformation print). If the counter value is 7% or more, also replace the ink absorber kit when replacing the logicboard ass'y. If the counter value is less than 7%, register the current ink absorber counter value to the replaced newlogic board.[See 3-3. Adjustment / Settings, (6) Service mode, for details.]Message on the LCD Cause SolutionThe selected paper cannot be fed fromcassette. Change the paper source andpress [OK].The paper type being used is not supportedfor paper feeding from the cassette.Change the paper source to the rear tray.Cannot apply the following setting(s).Change the setting(s).Settings made conflict each other. (e.g.Selecting borderless printing on plain paper)Change the settings so that they will notconflict each other.Device memory is full. Cannotcontinue process. Reduce the numberof documents (photos, etc.) to scan orcopy.The memory is not sufficient to do the printjob in copying.Reduce the amount of data to be printed, orprint from a computer.Press [Color]. The Black button was pressed, but it isinvalid.A temporary error. Press the Color button tocontinue the operation.Press [Black]. The Color button was pressed, but it isinvalid.A temporary error. Press the Black button tocontinue the operation.There are no photos in memory card. Supported image files are not in the memorycard.A temporary error.- Confirm that supported image files are inthe memory card.- Images with double-byte characters used inthe file name (or folder name) may not berecognized. Change the file (or folder)name so that it contains only single-bytealphanumeric characters.- If images are edited on the computer, printthem from the computer.The value exceeds the number ofcopies you can print.During selecting images or specifying thenumber of copies, the total print quantityA temporary error. The last operation beforethe error is cancelled, and the total print9 / 44