Canon imageRunner Advance C2030 Operating Manual

Also see for imageRUNNER ADVANCE C2020: Service handbook User guide Manual Service manual Setup guide

Canon imageRunner Advance C2030 Operating Manual Manual pdf 23 page image

21Avoid locations that are subject to vibration.For example, avoid installing the machine on unstable fl oorsor stands.Avoid exposing the machine to rapid changes intemperature.If the room in which the machine is installed is cold butrapidly heated, water droplets (condensation) may form insidethe machine. This may result in a noticeable degradation inthe quality of the copied image, the inability to properly scanan original, or the copies having no printed image at all.Avoid installing the machine near computers orother precision electronic equipment.Electrical interference and vibrations generated by themachine during printing can adversely affect the operation ofsuch equipment.Avoid installing the machine near televisions,radios, or similar electronic equipment.The machine might interfere with sound and picture signalreception.Insert the power plug into a dedicated power outlet, andmaintain as much space as possible between the machineand other electronic equipment.Do not remove the machine's leveling feet.Do not remove the machine's leveling feet after the machinehas been installed.If you put weight on the front of the machine while thedrawers or units within the machine are pulled out, themachine may fall forward. To prevent this from happening,make sure that the machine's leveling feet are in place.Select a Safe Power SupplyPlug the machine into a 120 V AC outlet.Make sure that the power supply for themachine is safe, and has a steady voltage.Do not connect other electrical equipment tothe same power outlet to which the machine isconnected.Do not connect the power cord to a multiplugpower strip, as this may cause a fire or electricalshock.The power cord may become damaged if it isstepped on, affixed with staples, or if heavyobjects are placed on it. Continued use of adamaged power cord can lead to an accident,such as a fire or electrical shock.The power cord should not be taut, as thismay lead to a loose connection and causeoverheating, which could result in a fire.If excessive stress is applied to the connectionpart of the power cord, it may damage thepower cord or the wires inside the machine maydisconnect. This could result in a fire. Avoid thefollowing situations:Connecting and disconnecting the power cordfrequently.Tripping over the power cord.The power cord is bent near the connection part, andcontinuous stress is being applied to the power outletor the connection part.Applying excessive force on the power plug.••••