Canon imageRUNNER ADVANCE DX 4945i Manual

Also see for imageRUNNER ADVANCE DX 4925: Setup guide

Canon imageRUNNER ADVANCE DX 4945i Manual Manual pdf 1 page image

Important Safety InstructionsThis chapter provides important safety instructions forthe prevention of injury to users of this machine andothers, and damage to property. Read this chapterbefore using the machine and follow the instructions toensure that you use the machine properly. The Canononline manual site (https://oip.manual.canon/) alsoprovides information on this machine. Read thisinformation also to ensure correct use.Do not perform any operations not described in thismanual. Canon will not be responsible for any damagesresulting from operations not described in this manual,improper use, or repairs or modifications not performedby Canon or a third party authorized by Canon.Unless otherwise stated, the illustrations used in thismanual are for the imageRUNNER ADVANCE DX 4945iwith the following optional equipment attached:• Single Pass DADF-C• Inner 2way Tray-M• Cassette Feeding Unit-AWWARNINGIndicates a warning concerning operations thatmay lead to death or serious personal injury if notperformed correctly. To ensure that you use themachine safely, always observe these warnings.CAUTIONIndicates a precaution for preventing the risk ofpersonal injury or property damage other thana product fault due to improper use of themachine. To ensure that you use the machinesafely, always observe these cautions.IMPORTANTIndicates important operational requirementsand restrictions that should always be observedwhen using this machine. Always observe theseimportant items to avoid malfunctions, faults orproperty damage due to improper machineoperation.Safety-related SymbolsThe following symbols are used on this product:Power switch (On)Power switch (Off )Power switch (Stand-by)Push-button switch (On /Off )Protective earthing terminalElectric shock warning: Hazardous voltage inside.Do not remove the cover.High temperature warning. Do not touch.Class II equipmentContains moving parts. Keep hands and otherbody parts away from moving parts.Electric shock warning: Unplug all power cordsfrom the power outlet.Sharp edges. Keep hands and other body partsaway from sharp edges.NOTESome models may use other symbols not listed here.InstallationTo ensure that you use this machine safely read thefollowing precautions carefully before installing themachine in a suitable location.WARNINGDo not install in the locations listed belowDoing so may result in a fire or electric shock.• Locations that risk blocking the ventilation slots (tooclose to walls or curtains or on materials such asdeep-pile carpets)• Damp or dusty locations• Near heating appliances or open flames• Near alcohol, paint thinners or other flammablesubstancesDo not use a wireless LAN close to medical equipment(only for products with a wireless LAN function)Radio waves can interfere with medical equipment andcause malfunctions that may lead to accidents.CAUTIONDo not install in the locations listed belowDoing so could result in a fault or adversely affect peopleor other equipment.• Outdoors or in locations exposed to direct sunlight• Locations subject to temperature and humidityextremes, whether low or high• Locations subject to dramatic changes intemperature or humidity• Near equipment that generates magnetic orelectromagnetic waves• Near electronic devices or precision equipment, suchas TVs, radios and computers• Laboratories or other locations where chemicalreactions occur• Locations heavily exposed to aerosol sprays,ammonia or other corrosive gases• Locations subject to instability or vibration• Surfaces that may warp under the weight of themachine or into which the machine is liable to sink(carpets, straw matting, beds, etc.)• Locations where air ventilated from the machinedirectly impacts peopleProvide adequate ventilation during useThis machine generates small amounts of ozone andother emissions during normal use. These amounts aretoo low to be harmful to humans. However, poorlyventilated rooms should be adequately ventilatedduring extended use or long print runs.Do not remove the leveling feet after installation(only for products with leveling feet)Doing so may cause the machine to move or tip over,resulting in injury.IMPORTANTWhen using a wireless LAN (only for products with awireless LAN function)• Install the machine no more than 50 meters from thewireless LAN router.• As much as possible, install in a location wherecommunication is not blocked by interveningobjects. The signal may be degraded when passingthrough walls or floors.• Install the machine as far as possible from digitalcordless phones, microwave ovens or otherequipment that emits radio waves.Connecting the telephone line (only for machinesthat support faxes)In certain circumstances, this machine may not be ableto communicate via some telephone lines or in someregions. One such example is when the total resistanceof the telephone line and the machine exceeds 1700Ω.In this event, contact your dealer or servicerepresentative.• This machine conforms to an analog telephone linestandard and can only be connected to ordinarysubscriber telephone lines. Connecting the machineto a business line or other dedicated line may resultin faults. Always check the line before connecting.Avoid installing the machine on a sheet or the likemade of material with low thermal resistance.• This machine includes a built-in paper drawer heater.Installing the machine without optional productsinstalled on surfaces with low resistance to heat,such as a plastic desk mat, may result in heat-induced degradation of the desk mat.About cables• Use a modular cable that is shorter than 3 meters.• Use a USB cable that is shorter than 3 meters.Power SupplyWARNINGUsing the power plug and cord correctlyImproper use may result in a fire or electric shock.• Check that the power supply used for the machine issafe and has a stable voltage.• Use only a power supply that meets the specifiedvoltage requirements.• Connect the machine to a securely grounded poweroutlet using the power cord provided.• Do not use power cords other than the cord provided.• The power cord provided should only be used withthis machine.• If you plug this machine into a power outlet withmultiple sockets, do not use the remaining socketsto connect other devices.• Do not use extension cords.• Run the power cord so as to avoid any risk of trippingover the cord.• Do not modify, pull, unduly bend or otherwisedamage the power cord.

/ 4

Related manuals for Canon imageRUNNER ADVANCE DX 4925