Canon imagePROGRAF iPF815 Basic Manual

Also see for imagePROGRAF iPF815: Technical documents Brochure Basic guide Basic guide Setup guide

Canon imagePROGRAF iPF815 Basic Manual Manual pdf 41 page image

41Replacing the PrintheadIf Auto Print is set to On in the printer menu, the printhead will be automatically adjusted afterPrinthead replacement when the system is finished filling with ink. In this case, follow the instructionsdisplayed for Printhead adjustment. If Auto Print is set to Off, execute Auto Head Adj. > AdvancedAdj. in the printer menu. (→ , If Vertical Lines are Warped or Colors are Misaligned)•Never remove an Ink Tank while the system is filling with ink.•9101112With the nozzles facing down and the metal contactstoward the back, insert the Printhead into the Carriage.Carefully push the printhead firmly into the Carriage,ensuring that the nozzles and metal contacts do not touchthe carriage.Pull the Printhead Fixer Cover down toward the front tolock the Printhead in place.Push the Printhead Fixer Lever toward the back of theprinter until it clicks.Close the Top Cover.It takes about six minutes for ink to fill the system.