70JPEGYou can specify the compression rate of JPEG images.C Specify the storage location for the scanned images.D Output the scanned images.When output is finished, the complete screen appears. Scan Firstis now finished.Hint• Clicking [Return to top] returns to the main screen of Scan First.• If you click [Open storage folder], the folder in which the savedscanned images were saved opens.Scanner SettingsBy default, CaptureOnTouch scans with scanning conditions thatmatch the document because scanning in full auto mode is enabled.If you want to specify, for example, the scanning mode and documentsize, you can configure the desired scanning conditions in the scannersettings.To configure scanner settings, click [OFF] for [Scans in the full automode] in the top screen, and then click [Scanner setting].Setting Basic ItemsScanner settings include the basic items that are configured in[Scanner setting], and the setting items that are configured in theadvanced settings dialog box. The settings in the advanced settingsdialog box are applied for settings other than the basic items.The settings in the driver settings dialog box are applied for any othersettings.Color modeSelect from the following modes for scanning documents.Detect automatically Automatically determines the color mode basedon the document content and scansaccordingly.24-bit Color Scans the document in color.Grayscale Scans the document in Grayscale.Black and White Scans the document in black and white(binary).Page SizeSpecify the page size of the document.If you specify [Match original size], the page size of the scanneddocument is detected and the images are saved at the detected size.Dots per inchSpecify the scanning resolution.When [Detect automatically] is specified, the resolution is detectedautomatically from the content of the scanned document.