Canon imageFORMULA P-215 User Manual

Also see for imageFORMULA P-215: Brochure & specs Brochure & specs Pocket guide Reference guide Specifications

Contents

Canon imageFORMULA P-215 User Manual Manual pdf 28 page image

28Basic OperationDocumentsThe scanner can scan documents ranging in size from business cards to A4/LTR. The document sizes that this scanner can scan are shown below.1) Up to 1,000 mm (39.4") in Long Document mode 3) Plastic cards2) When using the card slot 4) Up to 1.4 mm (0.055") for embossed cardsIMPORTANTThe documents to be scanned must satisfy certain criteria. Read thefollowing items carefully.• When scanning multiple documents of different sizes, place thedocuments so that they cover the entire span of the feed rollers byaligning the centers and leading edges of the documents.• It is recommended that documents exceeding 356 mm (14") in sizeare fed one sheet at a time.• Scanning documents before the ink is dry can cause problems withthe scanner. Always make sure that the ink on a document is drybefore scanning it.• Scanning documents that are written in pencil or similar materialmay make the rollers and scanning glass dirty, which can lead tosmudges on the scanned image and transfer the dirt to subsequentdocuments. Always clean the internal parts of the scanner afterscanning such documents.• When scanning a two-sided document that is printed on thin paper,the image on the opposite side of each page may show through. Inthis case, adjust the scanning intensity in the application softwarebefore scanning the document.• It is recommended that thin documents are fed one sheet at a time.Document type Width Length Thickness (density) ThicknessPlain paper 50.8 to 216 mm(2 to 8.5")70 to 356 mm(2.756 to 14") 1)52 to 128 g/m 2(14 to 34 lb bond)0.06 to 0.15 mm(0.0024 to 0.0059")Postcard 88.9 to 108 mm(3.5 to 4.25")127 to 152.4 mm(5 to 6")128 to 225 g/m 2(34 to 60 lb bond)0.15 to 0.3 mm(0.0059 to 0.0118")Business card 49 to 55 mm(1.93 to 2.17")85 to 91 mm(3.35 to 3.58")128 to 225 g/m 2(34 to 60 lb bond)0.15 to 0.3 mm(0.0059 to 0.0118")Other card 2) 3) 86 mm(3.39")54 mm(2.13") — 0.76 mm(0.03") or less 4)Feed rollerAlign the leading edgesAlign the centers