Canon imageFORMULA DR-M140 User Manual

Contents

Canon imageFORMULA DR-M140 User Manual Manual pdf 18 page image

18● Do not place objects on top of the scanner. Such objects may tip orfall over, resulting in personal injury.● Connect only to a power outlet of the rated voltage and powersupply frequency (120 V, 60 Hz or 220-240 V, 50/60 Hz dependingon your region). Doing so might cause a fire or electric shock.● When unplugging the power cord, grasp it firmly by its plug. Do notpull directly on the power cord, as this may damage or expose thecord's internal wiring, resulting in a fire or electric shock.● Leave sufficient space around the power plug so that it can beunplugged easily. If objects are placed around the power plug, youwill be unable to unplug it in an emergency.● Do not allow water or flammable substances (alcohol, paint thinner,benzene, etc.) to spill into the scanner, as this may result in a fire orelectric shock. Doing so might cause a fire or electric shock.● Push the power button to turn the scanner OFF for safety when notusing the scanner for a long period of time, such as overnight. Also,push the power switch to turn it OFF, and disconnect the power cordfrom the power outlet for safety when the machine will not be usedfor an extended period of time, such as during consecutiveholidays.● Do not block the ventilation holes. Doing so might causeoverheating.● Do not wear loose clothing or jewelry that may get caught in thescanner while you are using it, as this may result in personal injury.Be extra careful of neckties and long hair. If anything becomescaught in the scanner, immediately disconnect the power cord tostop the scanner.● Be careful when loading paper into the scanner and when removingjammed paper, as it is possible to cut your hand on the edge of asheet of paper.DisposalWhen disposing of this scanner, be sure to follow all local ordinancesand laws or consult with the retailer who sold you the scanner.When sending the scanner for repairsWhen a request is made for repairs, the scanner needs to be sent tothe specified address. When sending the scanner, use the packingbox in which it came. Firmly secure the scanner with packagingmaterial when you place it in the packing box.