|
LCD Messages9-8Troubleshooting9LCD MessagesThe following messages are displayed in the LCD when the machine performs afunction or if it encounters an error.ADJUSTINGWAITING TO SCANCause The machine is not ready for copying because you have just connected thepower cord to the machine.Remedy Wait for a while. The machine cannot scan documents for copying immediatelyafter the power cord is connected.CHECK PAPER SIZECause The size of the paper in the cassette or multi-purpose feeder is different fromthat of the paper specified in of the Menu.Remedy Load the correct paper size or change in of the Menu. (See "Loading Paper," on p. 2-4, or "Specifying the Paper Size," onp. 2-11.)Then reset the machine by opening the front cover and then closing it.CHECK PRINTERCause A problem has occurred in the printer.Remedy Reset the machine by opening the front cover and then closing it. If themessage persists, unplug the machine from the power supply and contactCanon Authorized Service Facilities or the Canon Customer Care Center.CHECK PRINTER COVERCause The front cover is not closed completely.Remedy Check the front cover, and make sure that it is completely closed.INSTALL CARTRIDGECause The cartridge is not installed or not installed correctly.Remedy Install the cartridge correctly. (See "Replacing the Cartridge," on p. 8-13.)
|
