Operation Panel1-4Introduction1Operation Panela COPY keySwitches the standby display to the Copy mode.b SCAN keySwitches the standby display to the Scan mode.c Enlarge/Reduce keySets an enlargement or reduction ratio of thecopy.d Exposure keyAdjusts the copy exposure.e Alarm indicatorFlashes red when the machine has a problemsuch as a paper jam. (The error message isdisplayed in the LCD.)f LCDDisplays messages and prompts duringoperation. Also displays selections, text, andnumbers when specifying settings.g Numeric keysEnter copy quantity and other numerical values.h Start keyStarts copying.i Stop/Reset keyCancels copying and other operations, andreturns to the standby display.j Energy Saver keySets or cancels the energy saver mode manually.The key lights green when the energy saver modeis set, and goes off when the mode is canceled.k Collate/2on1 keySorts copies in order of pages or reduces twodocuments to fit on a single sheet.l Image Quality keyAdjusts the quality of copies.m Memory indicatorLights green during copying or when the copy jobis stored in the memory.n Menu keyCustomizes the way your machine operates.o [ (-)] or [ (+)] keysScroll through the selections so you can seeother settings.p Set keySets or registers the contents you select.q Status Monitor keyChecks the status of copy and print jobs.Stop/ResetEnergySaverStartCOPYSCANStatus MonitorMenu Set1 2 34 5 67 8 90Enlarge/ReduceCollate/2on1ImageQualityExposure AlarmMemory
