FEEDER (ADF service mode)ADJUST (Adjustment mode)FEEDER (ADF service mode) > ADJUST (Adjustment mode)DOCST Adjust the reading start position: ADFDetail To adjust the reading start position at ADF stream reading.As the value is changed by 1, the margin on the leading edge of paper is changed by 0.1 mm.+: Leading edge margin becomes smaller. (An image moves to the leading edge.)-: Leading edge margin becomes larger. (An image moves to the trailing edge.)Adj/Set/Operate Method Enter the setting value, and then press OK or Apply key.Display/Adj/Set Range -30 to 30Unit 0.1 mmDefault Value 0LA-SPD Adj vertical scan magnification: ADFDetail To adjust vertical scan magnification ratio at ADF stream reading.As the value is changed by 1, the margin on the leading edge of paper is changed by 0.1 %.+: Image shrinks in the vertical direction-: Image expands in the vertical directionAdj/Set/Operate Method Enter the setting value, and then press OK or Apply key.Display/Adj/Set Range -30 to 30Unit 0.1 %Default Value 0FUNCTION (Operation / inspection mode)FEEDER (ADF service mode) > FUNCTION (Operation / inspection mode)FEED-CHK Set read mode for ADF ppr feed chckDetail To check paper feed of ADF only.Display/Adj/Set Range 1/21: SADF2: DADFRelated Service Mode FEEDER > FUNCTION > FEED-ONSL-ON Operation check of DADF solenoidDetail To start checking operation of the DADF solenoid (SL4).The DADF Solenoid will be ON for 0.1 second.Adj/Set/Operate Method The operation starts when the item is selected.Supplement/Memo DADF model onlyMTR-ON ADF Motor operation checkDetail To check operation of the DADF Motor (M4) or SADF Motor (M5).The motor operates for 3 to 4 seconds.Adj/Set/Operate Method The operation starts when the item is selected.FEED-ON Check ADF paper feedDetail To check paper feed of ADF only.Adj/Set/Operate Method The operation starts when the item is selected.Related Service Mode FEEDER > FUNCTION > FEED-CHK8. Service Mode265
