Copying4-192-Sided Copying1 to 2-Sided CopyingYou can make 2-sided copies from 1-sideddocuments.1 Place documents.For details, see “Placing Documents,” on p. 2-4.2 Press [COPY].3 Press [2-Sided] to select <1 >2-SIDED>,then press [OK].1 > 2 - S I D E D2 - S I D E DIf there are odd number of documents when the1-Sided to 2-Sided mode is used, the back side ofthe last copy is left blank.4 Press [ ] or [ ] to select TYPE> or , then press[OK].B O O K T Y P ET Y P E O F O U T P U T: The front and back sides of thecopy will have the same top-bottom orientation.: The front and back sides ofthe copy will have the opposite top-bottomorientation.For the landscape oriented documents:When is selected, the front andback sides of the copy will have the opposite top-bottom orientation. When isselected, the front and back sides of the copy willhave the same top-bottom orientation.5 Use – [numeric keys] to enter thedesired copy quantity (1 to 99).T E X T / P H O T O 11 0 0 % * L T REx.6 Press [Start].If you want to copy multiple documents usingthe platen glass, place a document and press[Start] once for each page. When scanning iscomplete, press [OK].To cancel all settings, press [Stop/Reset].When you switch the mode by pressing themode keys such as [FAX], all settings willbe canceled. If you want to keep the settings,store the settings as follows:[Menu] → → SETTINGS> → <2-SIDED> (See “COPY SETTINGS,”on p. 12-5.)You can skip step 4. In this case, the machinescans 1-sided documents to make 2-sided, copies.–––
