Canon iR1200 Series Service Manual

Also see for iR1200 Series: Service manual INSTALLATION PROCEDURE

Contents

Canon iR1200 Series Service Manual Manual pdf 463 page image

Chapter 1515-5515.2.18 Test Mode 0006-3199When using test mode, be sure to execute items according to the menu indicated on the display. The menu items intest mode are grouped into 7 blocks.1. D-RAM Test (1: D-RAM)Use it to be sure that data is properly written to and read from the D-RAM.2. CCD Test (2: CCD TEST)Use it to execute auto adjustment (contact sensor LED intensity or original read position) or to initialize the CCDread position parameter.3. PRINT Test (3: PRINT)Use it to generate a test pattern for service.4. MODEM NCU Test (4: MODEM NCU)Use it to execute a relay operation test or modem DTMF and tonal signal transmission/reception tests.17: 100 100 not used not used 10018: 0 0 not used not used 019: 400 400 not used not used 20020: 100 100 not used not used 10021: 0 0 not used not used 022: 400 400 not used not used 20024: 10 10 not used not used 2025: 60 60 not used not used 6027: 0 0 not used not used 028: 3 3 not used not used 356: 101 101 101 101 10157: 201 201 201 201 20158: 0 0 0 0 059: 0 0 0 0 060: 0 0 0 0 061: 0 0 0 0 0#5 TYPE POLAND EUROPE2 TAIWAN STANDARD USATYPE POLAND EUROPE2 TAIWAN STANDARDUSA