Messages regarding printheadsMessages regarding printheadsCannot adjust printhead. ............................................................................................................................................ 917PHeads: wrong pos. ....................................................................................................................................................... 917Wrong x printhead. (x is L, R, or not displayed) ................................................................................................ 917x printhead error (x is L, R, or not displayed) .................................................................................................... 917Cannot recognize print head x. (x is L, R, or not displayed) ........................................................................ 918Execute printhead cleaning. ....................................................................................................................................... 918Cannot adjust printhead.Cannot adjust printhead.Cause Corrective ActionThe Printhead nozzles are clogged. Execute Head Posi. Adj. again, as follows.1. Press the OK button to clear the error.2. Print a test pattern to check the nozzles.(See "Checking for Nozzle Clogging.") âž” P.8243. Clean the Printhead if the nozzles are clogged.(See "Cleaning the Printhead.") âž” P.8254. Execute Head Posi. Adj. again.(See "Automatic Adjustment to Straighten Lines and Colors.") âž” P.708The Printhead cannot be aligned;highly transparent film is loaded.Press the OK button to clear the error.We recommend using a type of paper that you often use, other than film, for Printhead adjustment.(See "Automatic Adjustment to Straighten Lines and Colors.") âž” P.708PHeads: wrong pos.PHeads: wrong pos.Cause Corrective ActionThe printheads are installed in thewrong positions.Open the Top Cover and switch the Printhead used once in the right side to the right side. Switchthe Printhead used once in the left side to the left side.Wrong x printhead. (x is L, R, or not displayed)Wrong x printhead. (x is L, R, or not displayed)Cause Corrective ActionAn incompatible Print-head has been instal-led.Open the Top Cover. Replace the Printhead L with a new one if Printhead L is displayed and the Printhead R ifPrinthead R is displayed. If neither left or right is indicated, replace both Printhead L and Printhead R with newones.(See "Replacing the Printhead.") âž” P.826x printhead error (x is L, R, or not displayed)x printhead error (x is L, R, or not displayed)Cause Corrective ActionThere is a prob-lem with thePrinthead.Follow these steps to replace the Printhead.1. Open the Top Cover.2. Replace the Printhead L with a new one if Printhead L is displayed and the Printhead R if Printhead R is displayed.If neither left or right is indicated, replace both Printhead L and Printhead R with new ones.(See "Replacing the Printhead.") âž” P.826Follow these steps to replace the Printhead.1. Turn off the printer, wait a while, and then turn it on again.2. Open the Top Cover.3. Replace the Printhead L with a new one if Printhead L is displayed and the Printhead R if Printhead R is displayed.If neither left or right is indicated, replace both Printhead L and Printhead R with new ones.(See "Replacing the Printhead.") âž” P.826iPF6400S Cannot adjust printhead.User's GuideError Message Messages regarding printheads917
