Note• The job name when printing the adjustment pattern is "Original Image Name + Pattern-Print". For example, the printjob name for the image "ABC.jpg" is "ABC_Pattern-Print.jpg".Paper Detailed Settings Dialog BoxPaper Detailed Settings Dialog BoxThis dialog box appears when you click the Advanced Settings button on the Main Sheet. You can set DryingTime and Roll Paper Margin for Safety by media type.• Drying TimeBetween PagesThis sets the wait time for the ink to dry between each completely printed sheet and the output of the sheet.Setting DetailsPrinter Default The settings of the printer operating panel are applied.None The paper is ejected immediately after printing.30sec. / 1min. / 3min. / 5min. /10min. / 30min. / 60min.The sheet is ejected when the specified time after printing has elapsed.Between ScansThis sets the wait time between line scans during printing.Setting DetailsPrinter Default The settings of the printer operating panel are applied.None The printing continues to the next line immediately after the last line.1sec. / 3sec. / 5sec. / 7sec. / 9sec. The printing continues to the next line after the set time.*For the media type that has problems, such as ink smears on the page or colors that seemuneven during borderless printing etc., increase the value for this setting.• Roll Paper Margin for SafetyNear End MarginThis sets the length of the near end margin of the roll paper.Setting DetailsPrinter Default The settings of the printer operating panel are applied.3mm Print at a standard size.*Select for Media Type that has no problem when printing with a standard size margin.20mm Select this when rubbing against the printhead occurs such as when using paper that tends tocurl.• Cut SpeedThis selects the auto cut speed.Setting DetailsPrinter Default The settings of the printer operating panel are applied.Fast Select this setting if cutting with the Standard setting is not clean.Paper Detailed Settings Dialog Box iPF6400SUser's GuideWindows Software Print Plug-In for Photoshop / Digital Photo Professional244
