Call a non-standard paper size registered in the printer driver with Custom Paper Sizes .Once you register Custom Paper Sizes, you then can select it repeatedly from the paper size list.Custom Paper Sizes can be set up to 18.0 m.This topic describes how to register a non-standard paper size by the name of 430*430 and print based on thefollowing example.• Document: Any Type• Page Size: A square sheet (430 × 430 mm [16.9 × 16.9 in])• Paper: Sheets• Media Type: Any type• Paper Size: A square sheet (430 × 430 mm [16.9 × 16.9 in])Note• The following procedures are based on OS X v10.7. The method of setting up non-standard paper sizes varies dependingon the version of Mac OS.1 Create the document in the application.2 Load the square paper (430 × 430 mm [16.9 × 16.9 in]) in the printer.3 Choose Print in the application menu.4 Select the printer in the A Printer list.5 Click Manage Custom Sizes in the F Paper Size listto display the Custom Paper Sizes dialog box.6 In Paper Size, enter the height and width of the original. Here, enter 43.00 cm in Height and Width.7 In Non-Printable Area, enter 0.5 for the top and side margins and 2.3 for the bottom margin. Here, meas-urements are entered in centimeters.8 Double-click Untitled in the list at left in the Custom Paper Sizes dialog box and enter the paper name—inthis case, 430*430.9 Click OK to close the Custom Paper Sizes dialog box.10 In the F Paper Size list, click the size of the original. In this case, click 430*430, the size you registered.11 If you configured the settings using the Page Attributes dialog box, click OK to close the dialog box, andthen select Print from the application software menu.Printing on Non-Standard Paper Sizes (Mac OS) iPF6400SUser's GuideEnhanced Printing Options Printing banners or at other non-standard sizes104
