1 - 93.3 Settings3.3.1 Standalone printer operationThis printer has an offline mode which allows the printer operation without connection to a computer.With the printer powered ON, press and hold the Resume button until the green indicator flashes the specifiednumber of times to start each operation, and then release the Resume button to execute the function.LED flash Operation Remark123CleaningNozzle check pattern printRoller cleaningSet A4 size or larger paper and printClean without paper and then clean with paper (A4 or larger)set3.3.2 Service mode functionsThis printer has a Service mode to set service only settings and output test prints. The Service mode can beentered using the control panel.1) With the printer power OFF, while pressing the Resume button, press the Power button. (Do not release thepower button.)2) While pressing the Power button, release the Resume button, press the Resume button again twice, and thenrelease the Resume button and Power button.3) The green indicator flashes during initialization.When the indicator stops flashing and remains on, press the Resume button the specified number of times toselect the function.(The indicator toggles between orange and green each time the Resume button is pressed.)4) After selecting the function, press the Power button, and the green indicator will light, and the function willbe executed.Count LED Function Remark0 Green Power off When there is no head, the carriage returns to the homeposition and locks1 Orange Service test print2 Green EEPROM information print3 Orange EEPROM initialization Destination is set to overseas during EEPROMinitialization4 Green Clear waste ink counter Clear waste ink counter5 Orange Destination setting After selecting a function press the Resume button(1: Overseas, 2: Domestic)6 Green Head refreshing Clean both BK/CL ink7 Orange Not used for service8 Green Not used for service9 Orange Not used for service10 Green Return to selection menu