About the Camera Selection AreaThe Camera Selection Area is used to display all the cameras currently available formonitoring from the network. You can select currently-available cameras via the Locationand Zone drop-down menus and then place them into the Viewing Area as Video Windows.z The Location drop-down menu lists the physical locations of cameras on thesystem.z The Zone drop-down menu lists the groups of areas within each location.Selecting Cameras for Viewing100Locations, zones and thumbnails are configured and managed byusers with Administrator privileges. You must have Administratorprivileges in order to modify settings.NoteAbout Camera ThumbnailsWhen a Location is selected, zones within that location appear as thumbnail ‘folders’ to theright of the Location and Zone menus. A scrollbar at the base of the Camera Selection Areacan be used to scroll the display of thumbnails.Each Zone is grouped into camera thumbnail images and these can be dragged onto theViewing Area to create Video Windows.When you select a location, its associated zones will be listed below.You can hide the Camera Selection Area to allow more displayspace for Video Windows. From the View menu, select CameraSelector to hide/show the Camera Selection Area.Tip
