98 VideoTo capture the photos1 Play back the scene from which you want to capture the photo.2 Pause the playback at the point you want to capture.3 Press j fully.To capture a photo sequence, hold j pressed down. The scenewill be played back by frames and each frame captured as a separatephoto.4 Touch [B] to return to the index screen.IMPORTANT• When capturing photos on an Eye-Fi card, photos will be uploadedautomatically if you are within the range of a configured network. Alwaysverify that Eye-Fi cards have been approved in the country/region ofuse. See also Using an Eye-Fi card (0 146).NOTES• The data code of the photos will reflect the date and time of recording ofthe original scene.• Photos captured from a scene with a lot of fast movement may beblurred.• e Photos will be recorded on the memory selected for record-ing photos.• [B Photo Sequence]:- Up to 100 photos can be captured at a time.- The photo sequence capture will stop when the end of the scene isreached (playback will pause at the beginning of the following scene).- Photos will be captured at intervals of 1/30 second (1/24 second, ifthe scene was recorded at a frame rate of [E PF24]).Dividing ScenesYou can divide scenes (original scenes only) in order to leave out thebest parts and later cut out the rest.1 Open the [Original] index screen.Operating modes:
