Canon VC-C3 Instruction Manual

Also see for VC-C3: Pin assigments guide User guide

Canon VC-C3 Instruction Manual Manual pdf 30 page image

Check the following before contacting your Canon supplier.The wireless controller does not work.Check 1: Is the base LED OFF?Response: • Turn the base power switch ON. P.16• Check that the plug is inserted into the main power outlet correctly andpushed in all the way.Check 2: Is the base LED blinking green (at 1-second intervals)?Response: If the VC-C3 is out of the OPERATE mode. Press the button on thewireless controller to turn the VC-C3 to the OPERATE mode. P.24Check 3: Is the base LED lit orange?Response: Operation is restricted by the ID setting function. Reset the ID correctly( P.25, 26) or cancel the operation restriction ( P.28). P.25Check 4: Is the base LED lit green?Response: • Check the remaining charge in the wireless controller batteries.• Ensure that you are using the wireless controller inside its effectiverange. P.14There is no image on the monitor.Check 1: Is the base LED blinking green (at 1-second intervals)?Response: If the VC-C3 is out of the OPERATE mode. Press the button on thewireless controller to turn the VC-C3 to the OPERATE mode. P.24Check 2: Are all the components connected correctly?Response: Check that the cables are connected correctly. P.12Check 3: Are all the components switched ON?Response: Switch all the components ON. P.1630Troubleshooting