Canon VC-C3 Instruction Manual

Also see for VC-C3: Pin assigments guide User guide

Canon VC-C3 Instruction Manual Manual pdf 16 page image

First check that the components are correctly connected. (P.12)Turning the Units ON and OFFThere are power switches available on both the camera control unit and the base.While these switches can be used in either order, VC-C3 operation differsdepending on the circumstances.The camera control unit’s main power switch ON and thebase power switch ONThe LEDs on the base, camera head and camera control unit are green and theimage appears on the monitor.n The VC-C3 is set to auto-focus mode when it is first turned on or when power isrecycled.16Using the VC-C3Camera control unitmain power switchBase power switchMonitor (ON)Camera(base ON)Camera controlunit (ON)If any of the connection cables are disconnected while the base or cameracontrol unit is powered ON, then proceed as follows:1. Turn the base power switch and the camera control unit’s mainpower switch OFF.2. Connect the cables correctly.3. Turn the base power switch and the camera control unit’s mainpower switch ON again.