1-31Setting the Image Server, Audio Server and HTTP Server (Server)11 Detailed SettingsAudio Server(1) [Audio Transmission from the Camera]When [Enable] is selected, the audio input through the microphone attached to the cameracan be transmitted to VB-C60 Viewer.(2) [Input Volume]Set the audio input volume between 1 and 100. The greater the value, the larger the inputvolume.(3) [Voice Activity Detection]If [Enable] is selected, the audio transmission size is reduced temporarily when no audio isoutput. This way, the load of the applicable network can be reduced.(4) [Audio Reception from the Viewer]If [Enable] is selected, the audio from the optional VK Viewer or bundled VK-Lite Viewer canbe received and output from the speaker with amplifier connected to the camera.(5) [Output Volume]Set the audio output volume between 1 and 100. The greater the value, the larger the outputvolume.(6) [Echo Canceller]If [Enable] is selected, echo between the microphone and speaker is suppressed.(7) [Audio Input]Set the microphone input. Select [Line In], [Microphone In (dynamic microphone)] or[Microphone In (condenser microphone)].COPY
