Menu
Canon TX-F Operation Manual
                                                                              | |
Contents
|
5.2 FULL AUTO/AUTO Measurement– 21 –Select the number of times of measurement in FULL AUTO modePress PUFF TIMES switch andselect 1 or 3.The number of times will be dis-played within brackets () afterthe words “FULL AUTO”.NOTE: It is recommended that the measurement to be repeated at least three timesin order to obtain more reliability.Check that the examinee’s eye is displayed on the monitorIf you cannot see it at all, adjust the position of the measurement head using thetrackball.♦ Adjustment of measurement head positionMeasurement head moves to right and left when trackball is turned to right andleft. Measurement head moves up and down when it is turned back and forth.Have the examinee look at the eye fixation lampHave the examinee look at the green internal eye fixation lamp.♦ If the examinee cannot seethe lamp well and so the eyecannot be fixedPress FIXATION switch and havethe examinee look at the externaleye fixation lamp on the side ofthe nozzle with the eye that isnot going to be measured.2FULLAUTO(3) N o . 0 0 0 0 0 1mmHgSTD[ , , ]L [ , , ]3 0R34External eye fixation lamps |
Related manuals for Canon TX-F
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved