Aligning the Print HeadIf printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print headposition.Note• If the remaining ink level is low, the print head alignment sheet will not be printed correctly.Replace the ink tank whose ink is low.You need to prepare: a sheet of A4 or Letter-sized plain paper (including recycled paper)** Be sure to use paper that is white and clean on both sides.1. Make sure that the power is turned on.2. Load a sheet of A4 or Letter-sized plain paper in the cassette.After pushing the cassette back, the paper information registration screen is displayed on the touchscreen. Select A4 or Letter for Page size, then select Register.If a message is displayed on the screen, follow the directions in the message to complete registration.Note• Be sure to load paper in the cassette. Even if you load paper on the rear tray, the print headalignment sheet is not be printed.3. Open the operation panel, then pull out the paper output tray.4. Select Setup on the HOME screen.Using the Operation PanelThe setup menu screen will appear.5. Select Maintenance.The Maintenance screen will appear.78