Canon SELPHY ES3 CDP-E063-010 User Manual

Also see for 2675B001 - SELPHY ES3 Photo Printer: Software guide Software guide Beginner's guide Software user's guide Software user's guide

Contents

Canon SELPHY ES3 CDP-E063-010 User Manual Manual pdf 76 page image

76 Printing from a Mobile Phone (Wireless Printing)Infrared (IrDA) Wireless PrintingPrint images transmitted from a mobile phone supporting infrared data communication (IrDA).SELPHY printer supports IrSimple (higher speed infrared data communication).z The mobile phone must have the following features.• Infrared data communication (infrared data communication port supporting IrDA)• A built-in camera capable of recording and saving JPEG images.1 Check that no memory cards are inserted in the printer, noBluetooth unit is attached, and the camera is not connected viaUSB cable.2 Press until the power lamp lights green to turn the power on.3 Transmit an image from your mobile phone to the printer.• Printing starts after datatransmission is completed andthe power lamp blinks green.3 • Printing is done according to the setting value specified in [Print Settings]. Setting of each itemmust be done in advance (p. 54).• If an error occurs, a message will display on the printer's or mobile phone's screen.• Printing cannot be canceled by pressing during infrared printing.• If the transfer is not working well, reposition the mobile phone closer and directly in front of theinfrared data receiver and reinitiate the transfer.• Note that the distance over which infrared signals can be transmitted and received variesaccording to the mobile phone model. For details on connection, refer to your mobile phone'suser guide.Within 20 cm (7.9 in.) (Do notplace objects within thisrange.)Effective rangeApprox. 10 degrees (rightto left)Approx. 20 degrees (top tobottom)COPY