107TrimmingYou can cut out a portion of a recorded image and save it as a new imagefile.1 Choose [Trimming].● Press the n button, choose the 1 taband [Trimming], then press the m button.2 Choose an image.● Press the qr buttons to choose the imageand press the m button.3 Adjust the trimming area.X A frame will appear around the portion of theimage to be trimmed.X The original image will display in the upperleft and the trimmed image will display in thelower right.● If you press the zoom button to the left orright, you can change the frame size.● If you press the opqr buttons, you canmove the frame’s position.● If you press the l button, you canchange the frame orientation.● In an image with detected faces, grayframes appear around the faces located inthe upper left image. The frames can beused for trimming. You can switch betweenframes by pressing the 0 button.● Press the m button.4 Save as a new image and display.● Follow Steps 4 – 5 on p. 106.Trimming AreaTrimming Area DisplayRecorded pixelsafter trimming• Images with a recording pixel setting of or , or images resizedas cannot be edited.• The width and height ratio of an image that can be changed is fixed at4:3 (for a vertical image 3:4).• The number of recorded pixels in a trimmed image will be smaller thanbefore trimming.COPY
