Canon Pixma MP495 Series On-screen Manual

Also see for PIXMA MP495 Series: Getting started Manual Manual Network Setup Installation guide

Do not turn off the power while the machine is operating.Do not plug in or unplug the USB cable while the machine is scanning originals.Do not open the Document Cover or move the loaded original until scanning is completed.NoteThe position or size of the original may not be scanned correctly depending on the type oforiginal.In this case, refer to the on-screen manual: Advanced Guide to change the settings inDocument Type and Document Size of MP Navigator EX to match the original and scan it.When the program selection screen appears:The program selection screen may appear after performing step 2.If the program selection screen appears, select MP Navigator EX Ver4.0 and click OK.To start MP Navigator EX automatically without displaying the program selection screen, followthe procedure below.- For Windows 7 or Windows Vista users, refer to "For Windows Users" in " Troubleshooting"of the on-screen manual: Advanced Guide .- For Windows XP users, select MP Navigator EX Ver4.0 as the software application to beused in the program selection screen, select Always use this program for this action, thenclick OK.Page topPage 23 of 759 pagesSaving Scanned Data on the Computer