Canon Paper Deck-V1 Service Manual

Also see for Paper Deck-V1: General Timing Chart/General Circuit Diagram Circuit Diagram Portable manual

Contents

Canon Paper Deck-V1 Service Manual Manual pdf 53 page image

Chapter 33-11F-3-406) Place the compartment [5] on the base you preparedin step 1).3.3.3.4 Removing the DeckLifter Motor (M102) 0009-21011) Disconnect the connector [1], and remove the 5screws [2]; then, detach the deck lifter motor unit[3].F-3-413.3.4 Lifter Cable (Front)3.3.4.1 Opening theCompartment 0009-21021) Push the deck release grip to detach the deck fromits host machine. Then, push down the latch plate[1] found at the rear left to open the compartment[2].F-3-423.3.4.2 Removing the LifterCable (deck front) 0009-21041) If there is any paper, remove all.2) Insert 2 long screwdrivers [1] to keep the lifter inposition.3) So that the left and right holes of the compartmentside plate and the left and right holes of the lifterwill match, move down the lifter by pushing theflag [2] of the paper supply position sensor.- Connect the power plug, and turn on the hostmachine's power switch.- Push the flag [2] of the paper position sensor foundinside the compartment [3] until the deck liftercomes into contact with the screwdrivers.(The deck lifter will stop when you let go of the flag.)F-3-434) Loosen the 4 screws [1], and detach the front cover[2].[1] [4][3][4][2][5][1][2][2][3](rear)[2][1][1][3][2]