Canon Paper Deck-V1 Service Manual

Also see for Paper Deck-V1: General Timing Chart/General Circuit Diagram Circuit Diagram Portable manual

Contents

Canon Paper Deck-V1 Service Manual Manual pdf 34 page image

Chapter 22-142.5 Opening /Closing the Compartment2.5.1 Opening/Closing the Compartment 0009-20561. Opening/Closing the DeckWhen the deck open switch (SW100) is pushed, the deck open solenoid (SL102) goes on to free the lock on the deck(compartment); as a result, the deck is pushed several centimeters to the front by the work of a spring. At the sametime, the deck lifter motor (M102) starts to rotate to move down the lifter inside the deck.When the deck (compartment) is pushed into the host machine, the deck open sensor (PS109) detects the light-blocking plate, permitting the lifter to move up as far as the pickup position.When the deck lifter motor rotates to open/close the deck, the deck open indicator (LED100) on the open switch PCBgoes on or flashes.F-2-122. Sequence of Operation Used to Open/Close the DeckDeck lifter lower limit detectionsignal (DECK_LOW_LIM)J08- 8Deck lifter motor drive signal J08M102DCcontrollerPCBSidedeckdriverPCBDeck lifterDeck open detection signal(DECK_OPEN_DTC_SW)Deck open solenoid drive signal(DECK_OPEN_SL)Deck open signal (DECK_OPEN_SW)OpenDeck open indicator LED signal(LED_ON)SW102SL102SW101Open switch PCBSW100LED100J3-1-4Deck lifter upper limit detectionsignal (UPPER_LIM)PS103 J04- 9Deck open detection signal(DECK_OPEN_DTC)PS109(compartment)J04- 4J04- 1J09- 7J10- 3J09- 2(hostmachine)