Canon PIXMA mini260 Photo Printing Manual

Also see for PIXMA mini 260: Easy Setup instructions

Contents

Canon PIXMA mini260 Photo Printing Manual Manual pdf 7 page image

5Before PrintingNoteFor information on how to install the Print Head and ink tank, refer to the Easy SetupInstructions (Setup Sheet).Ink LampYou can check the status of ink tank according to the way its lamp flashes.z On: The printer is ready to print.z Slow flashing (at around 3-second intervals): Ink is low. If the printing is blurred, replacing theink tank is recommended after the printing. See “Replacing an Ink Tank” on page 48.If the printing is not blurred, you can continue printing for a while, but the printer may not beable to print properly along the way. We recommend you to have a replacement ink tankavailable.z Fast flashing (at around 1-second intervals): Ink tank is empty, or the printer is not ready due toan error. Check an error message on the LCD and take an appropriate action. See “ErrorMessage Is Displayed on the LCD” on page 55.z Off: Make sure that the ink tank is inserted properly. If the lamp is still off after reinserting theink tank, there has been an error and the printer cannot print. Confirm the error messagedisplayed on the LCD and take an appropriate action. For details, “Error Message Is Displayedon the LCD” in “Troubleshooting” on page 55.