Canon PIXMA mini260 Photo Printing Manual

Also see for PIXMA mini 260: Easy Setup instructions

Contents

Canon PIXMA mini260 Photo Printing Manual Manual pdf 40 page image

38 Printing Photographs from a Wireless Communication DevicePerforming Infrared CommunicationYou can print photos in your mobile phone or PDA.When printing through infrared communication, also refer to the manual of your mobile phone orPDA.1 Turn on the printer.2 Load the paper.See “Loading Printing Paper” on page 11.3 Set the printing paper and layout.See “Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone or aPDA” on page 36.4 Start Infrared Communication.(1) Oppose the infrared port of the mobile phone or the PDA to that of the printer at adistance of less than 7.9 inch (20 cm).(2) Select the photo to print and send the data to the printer using the infraredcommunication function of the mobile phone or the PDA.Printing will start after sending all data.NoteThe effective angle of the IrDA Port of the printer is about 10° from the central axis in both verticaland horizontal directions.The allowable distance of communication with the printer depends on the mobile phone or the PDAyou use. For this distance, refer to the manual of your mobile phone or PDA.IrDA Port of printerLess than 7.9 inch (20 cm)(Do not block with any obstacle.)Effective angle(in both vertical and horizontal direction):About 10°Infrared Port