66 Troubleshooting Colors Are Uneven or StreakedPrinter Does Not Start or Stops During Print Jobs Printing Does Not Start Printing Stops Before It Is CompletedMedia Type setting in theOperation Panel does notmatch the actual type of paper.Check that the Media Type set in the Operation Panel matchesthe type of the loaded printing paper.If you notice abrasion even with the media type set correctly tomatch the loaded paper, set the Paper Thickness Lever to theright.Cause ActionPrint quality is not setappropriately.In the Operation Panel, set Print quality to High (quality-priority).Especially when printing a document that requires a lot of ink,increasing the Print Quality setting is effective in reducinguneven colors.Cause ActionInk tank is empty. An ink tank is not installed properly, or is out of ink.Confirm the error message displayed on the LCD and take theappropriate action to resolve the error.Ink tank is not installedsecurely.If the ink lamp is not lit, press the mark on the ink tank until itclicks into place. The ink lamp lights up red when the ink tank isfully inserted.Cause ActionOut of paper Make sure that paper is loaded. If paper has run out, load paper.Cause Action