Canon PIXMA MX300 Series Quick Start Manual

Also see for PIXMA MX300: Supplementary guide Brochure & specs Manual Install guide Quick start guide

Contents

Canon PIXMA MX300 Series Quick Start Manual Manual pdf 94 page image

90 Troubleshooting Error No.: 300 Is Displayed Error No.: 1700/1710 Is Displayed Error No.: 2001 Is DisplayedCause ActionThe machine is not ready. Confirm that the Power lamp is lit green.If the Power lamp is off, turn the machine on.While the Power lamp is flashing green, the machine is initializing. Wait until thePower lamp stops flashing and remains lit green.If the Alarm lamp is lit orange, an error may have occurred on the machine. Fordetails on how to resolve the error, see “An Error Message Is Displayed on theLCD” on page 76.Machine is not connected properly. Make sure that the USB cable is securely plugged in to the machine and thecomputer.z If you are using a relay device such as a USB hub, disconnect it, connect themachine directly to the computer, and try printing again. If printing startsnormally, there is a problem with the relay device.Consult the reseller of the relay device for details.z There could also be a problem with the USB cable. Replace the USB cableand try printing again.Your machine is not selected in Printeron the Print dialog box.Select your machine’s name in Printer on the Print dialog box.If your machine’s name does not appear in Printer, follow the procedure belowto check that the driver for your machine is installed to your computer.(1)Select Print & Fax Preferences in Printer.In Mac OS X v.10.2.8 or 10.3.x, select Edit Printer List in Printer.(2)Check that your machine’s name is displayed in the list of printers and thatthe check box is selected.In Mac OS X v.10.2.8, check that your machine’s name is displayed inPrinter List.(3)If your machine’s name is not displayed, click Add(+) to add the machine.If you cannot add the machine, follow the procedure described in your setupsheet to reinstall the MP Drivers.Cause ActionThe ink absorber is almost full. See “REQ. SERVICE SOON” in “An Error Message Is Displayed on the LCD”on page 76.Cause ActionNo response from connected digitalcamera or video camcorder. /Connected digital camera or videocamcorder is not compatible with thismachine.See “INCOMPATIBLE CAMERA” in “An Error Message Is Displayed on theLCD” on page 76.