Canon PIXMA MX300 Series Quick Start Manual

Also see for PIXMA MX300: Supplementary guide Brochure & specs Manual Install guide Quick start guide

Contents

Canon PIXMA MX300 Series Quick Start Manual Manual pdf 28 page image

24 Printing Photographs Directly from a Compliant Device2 Connect the PictBridge compliant device to the machine.(1) Make sure that the PictBridge compliant deviceis turned off.(2) Connect the PictBridge compliant device to themachine using a USB cable recommended bythe manufacturer of the device.The device turns on automatically.If your device does not turn on automatically,turn it on manually.(3) Set up the PictBridge compliant device fordirect printing.will appear on the LCD of the device whenthe machine is correctly connected.3 Specify the print settings such as paper type and layout.See “About PictBridge Print Settings” on page 25.You can make settings using the menu on the LCD of your PictBridge compliant device.Select the size and type of paper that you loaded in the machine.If your PictBridge compliant device does not have setting menu, change the setting from themachine. For details, see “Setting on the Machine” on page 27.4 Start printing from your PictBridge compliant device.NoteDepending on the model or brand of your device, you may have to select a print mode compliantwith PictBridge before connecting the device. You may also have to turn on the device or selectPlay mode manually after connecting the device to the machine.Perform necessary operations on the PictBridge compliant device before connecting it to thismachine according to instructions given in the device’s instruction manual.(2)