13Before Using the Machine2 Prepare to load paper.(1) Open the Rear Tray.(2) Pull out the Paper Support.Put your finger in the rounded indent of thePaper Support and pull it out until it stops.(3) Open the Paper Output Tray.Put your finger in the rounded indent besidethe Paper Output Tray and open it gently.(4) Open the Output Tray Extension.Open up and set the Output Tray Extensioncompletely by pressing down the hollow on itsfront side.(5) Adjust the position of the Paper Thickness Lever.Set it to the right when printing on envelopes or T-shirt transfers, and left when printing onany other type of paper. See “Paper Handling” on page 10.3 Load the paper.(1) Load the paper in the Rear Tray with the printside facing UP.(2) Align the paper stack against the right side ofthe Rear Tray.(3) Pinch the Paper Guide and slide it against theleft side of the paper stack.4 Specify the page size and media type settings according to the loaded paper.NoteIf the corners or edges of the paper are smudged, try to print with the Paper Thickness Leverset to the right. It may improve print quality.Reset the Paper Thickness Lever to the left when you finish printing.For details on the Paper Thickness Lever, refer to “Inside” in “Main Components” of the User’sGuide on-screen manual.Notez When performing copy direct printing without using a computer, select the size and type of theloaded paper using the Operation Panel.For details on settings, see “Changing the Copy Settings” on page 17 or “Changing the PrintSettings” on page 50.z When using the machine connected to a computer, select the size and type of the loaded paperin Page Size (or Paper Size) and Media Type in the printer driver.For details on printer driver settings, see “Printing with Windows” on page 20 or “Printing withMacintosh” on page 21.(3)(2)(4)(5)(1)(1)(2)(3)(A)** Do not load higher than the Load LimitMark (A).
