Canon PIXMA MP950 Service Manual

Also see for PIXMA MP950: Supplementary guide Start here User guide

Contents

Canon PIXMA MP950 Service Manual Manual pdf 6 page image

1. MAINTENANCE1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and ReplacementConsumables by Service Engineer(1) AdjustmentNote: DO NOT loosen the red screws at both ends of the carriage shaft, securing the print head position, as they are not re-adjustable.The red screws securing the paper feed motor may be loosened only at replacement of the paper feed motor unit.*1: Only for CD / DVD printing supported regions.(2) Periodic maintenanceNo periodic maintenance is necessary.(3) Periodic replacement partsThere are no parts in this machine that require periodic replacement by a service engineer.(4) Replacement consumablesThere are no consumables that require replacement by a service engineer.Adjustment Timing Purpose Tool Approx.timeEEPROM reset At logic board replacement To reset each setting None.Perform in theservice mode.1 min.LCD languagesettingsAt logic board replacement To set the language to be displayedon the LCD.None.Perform in theuser mode.1 min.Destination setting(EEPROM settings)At logic board replacement To set destinations None.Perform in theuser mode.1 min.Waste ink counterresetting(EEPROM settings)- At logic board replacement- At waste ink absorberreplacementTo reset the waste ink counter. None.Perform in theservice mode.1 min.Waste ink amountsettings(EEPROM settings)- At logic board replacement- At waste ink absorberreplacementTo set the waste ink amount to thewaste ink counter.None.Perform in theservice mode.1 min.Paper feed motorposition adjustmentAt paper feed motorreplacementTo adjust the belt tension. (Positionthe paper feed motor so that the beltis stretched tight.)None. 2 min.CD / DVD detectionsensor light volumecorrection *1- At logic board replacement- At carriage unit replacementTo correct the light volume for theCD / DVD detection sensor.None.Perform in theservice mode.2 min.Grease application - At carriage unit replacement- At PR shaft ass'yreplacement- At CL base or CL gearreplacement- To maintain sliding properties ofthe carriage shaft and the lift camshaft.- To protect the machine's slidingportions (gears).FLOIL KG-107A 1 min.New Ink system functioncheck- At logic board replacement- At platen unit replacement- At carriage unit replacementTo maintain detection functionalityfor presence of the ink tanks andeach ink tank position.None.Perform in theservice mode.1 min.FAU sponge sheetposition- At FAU sponge sheetreplacement- At FAU sponge framereplacement- At scanning unit replacementTo position the FAU sponge sheet None. 2 min.1-1