|
*1: Change the paper in each Bottom plate cleaning. The cleaning can end when paper does not get any soiling.*2: Locations to clean in servicing when soiling on paper in automatic duplex printing persists:*3: How to prepare and set the ASF sub-roller cleaning sheet:1) Fold a sheet of plain paper lengthwise in half.2) Fold the paper at approx. 60 mm from the end, and fold the folded end in half backward, as shown below.3) Moisten the folded end portion (indicated by the blue circle in the figure above) using a wipe, and set the paper in the ASF so that the moistened edge ofthe paper contacts the 2 sub-rollers. Then, fold the other end of the paper along the ASF cover edge to hook the paper to the ASF cover, as shownbelow.4) With the machine turned on in the user mode, set the paper source to the ASF and press the Menu button. Select Maintenance / Settings, Maintenance,then Roller cleaning.5) The paper wipes off ink from the sub-rollers.* Occurrence level:A: The symptom is likely to occur frequently. (Caution required)B: The symptom may occur under certain conditions, but likeliness is assumed very low in practical usage.C: The symptom is unlikely to be recognized by the user, and no practical issues are assumed.(white area along the edgesof the scanned image), ifany.To the table of contents To the top2-11
PreviousNext |