73TroubleshootingENGLISHChanging the port nameTroubles in the network setup of the Card SlotProblem Possible Cause and MeasuresChanging the port nameTo change the port name, click Set Port Name on the Setup Results dialogbox.The Set Port Name dialog box is displayed, where you specify the port name.By changing the port name, you can change the name of the machine. Whenyou set up an additional computer to use the machine whose port name youchanged, the machine is displayed with the changed port name.When two or more computers are set up, the changed name is displayed. Whenmultiple computers or printers are present, this can be used to change the nameto one that is easy to remember.Port NamePort names should consist of alphanumeric characters and be no longer than 24characters (12 characters in Windows Me or Windows 98), excluding the prefix.The port name includes the fixed prefix “CNBJNP_”, which you do not need toenter.Problem Possible Cause and MeasuresUnable to determine whether the CardSlot is mountedOpen My Computer, and find the canon_memory on‘MP600R(xxxxxxxxxxxx)’ icon with the mapped drive letter.* xxxxxxxxxxxx are 12 alphanumeric characters.* The icon name may vary depending on the language version of Windowsyou are using.The CANON_MEMORY icon appears on the desktop.The available drive letter cannot beselected on the Network Setup of theCard Slot dialog boxz On this dialog box, only D to Z can be selected as the network drive for theCard Slot.z The network setup of the Card Slot may have already succeeded, and thecomputer merely fails to access the Card Slot for other reasons. Refer to“Cannot access the Card Slot after the network setup of the Card Slot iscomplete” in the Network Guide on-screen manual.
