|
3-4. Verification Items(1) Service test printOn the service test print (sample below), confirm the EEPROM information as shown below. (The information isgiven in the upper portion of the printout.)MP500: Model nameJPN: DestinationVx.xx: ROM versionUSB (xxxxxx): USB serial numberFA = xx xx xx: Reserved for plant useD = xxx.x: Waste ink amount (%)CDR (+xxxxx, +yyyyy): CD / DVD sensor position correction valueAB (K = OK Y = ...): Ink system check resultOn the service test print (sample below), confirm the following items:- Check 1, top of form accuracy: The lines shall not extend off the paper.- Check 2, EEPROM information- Check 3, nozzle check pattern: Ink shall be ejected from all nozzles.- Check 4, check pattern for irregular line feeding: There shall be no remarkable streaks or unevenness.- Check 5, check pattern for uneven printing due to carriage movement (standard mode): There shall be noremarkable unevenness.- Check 6, check pattern for uneven printing due to carriage movement (9600 dpi mode): There shall be noremarkable unevenness.- Check 7, CD / DVD sensor and automatic print head alignment sensor correction: The results shall beOK.1-33
|
