Canon PIXMA MP500 Service Manual

Also see for PIXMA MP500: Supplementary guide Specification sheet Start here User guide User guide

Contents

Canon PIXMA MP500 Service Manual Manual pdf 17 page image

2-5. Troubleshooting by Symptomrise of the print headtemperatureerror code "5200" is displayed, indicating theprint head temperature rise error.specified limit, an intermission is insertedduring printing.Restrictions on paper The current paper cannot be set. Change thesize and type.Re-select the supported paper type and size.Recommendation ofthe print headalignment (only onarrival of the machine)Head alignment required. Load paper and press[OK].Yes No- Select Yes, and press the OK button.=> Automatic print head alignment is done.- Select No, and press the OK button.=> The procedures on arrival of themachine are finished.USB cable notconnected Connect USB cable and turn on the PC. Connect the USB cable.Cancellation of imageselect informationReset the selected photo information?Yes NoWhen one or more images are selected inMulti-photo print or Layout print, and if a usertries to display the menu or sub-menu, themessage is displayed.- Select Yes, and press the OK button.=> The image selection is cancelled, and themenu or sub-menu is displayed.- Select No, and press the OK button.=> The LCD returns to the displayimmediately before the message wasdisplayed.Symptom SolutionFaulty operation The power does not turn on.The power turns off immediatelyafter power-on.- Confirm the connection of- the power cord, and- between the logic board and the power supplyunit.- Replace the- AC adapter, or- logic board ass'y *1 .A strange noise occurs. - Remove foreign material.- Attach a removed part if any.- Check the operation of the moving parts (such aspurge unit, carriage unit, and paper feedingmechanism)- Replace a faulty part, if any.Nothing is displayed on the LCD. - Confirm the connection between the operationpanel, the scanner unit, and the logic board.- Replace the- LCD, or- logic board ass'y *1 .A portion of the LCD is notdisplayed.- Perform the button and LCD test in the servicemode, and confirm that the LCD is displayedwithout any segments missing.- Confirm the connection between the operationpanel, the scanner unit, and the logic board.- Replace the1-11