Lm0E3. Press the PHOTO button fully. ,'_JL_• 0 and focusing frame disappear and you hear a shutter sound. )_I1_._ _• The card access indicator flashes and the card access displayappears.• The still image shown on the screen will be recorded on the memory card.OTo use the self-timer (E:_ 74), press the _ (self-timer) button before step 2and press the PHOTO button fully.0 When the subject is too bright (overexposed), the ND filter turns onautomatically ("ND" appears on the screen). If it is still too bright, "OVEREXP"starts flashing. In such case, use an optional ND filten If you wish to turn offthe ND filter: Open the menu and select [CAMERA SET UP]. Select [ND], set itto [OFF] and close the menu.0 "OVEREXP" does not appear when you lock the exposure with the EXP dial.0 When the Focus-Priority mode is set to [ON]:If the subject is not suitable for autofocus, the focusing frame turns yellow andlocks the focus. The confirmation sound beeps once. Adjust the focus manuallywith the focus ring.C)When the focus-priority mode is set to [OFF]:No focusing frame appears.In step 2, 0 turns green, and focus and exposure are locked.Recording Still Images on a Memory Card While RecordingYou can record still images on a memory card by pressing the PHOTO button whileyou are recording a movie on the tape.C)The size of the still image will be 640 x 480.0 You can use the full zoom range (1 lx optical zoom and 44x/220x digitalzoom).0 The quality of the still image is slightly lower than a still image recorded inCARD CAMERA mode.0 Card mix and 16:9 mode cannot be used when [PHOTO REC] is set to [CARDr_].OThe still image cannot be recorded on a memory card when a fader, effect orthe multi-image screen is activated.OThe beep does not sound when you press the PHOTO button while recording amovie on the tape.114