Canon Optura Xi Instruction Manual

Also see for optura Xi: Instruction manual Brochure Instruction manual

Canon Optura Xi Instruction Manual Manual pdf 107 page image

7. Press the STOP • button on the wireless controllerto stop dubbing.Audio device: Stop playback.Set the zero set memory at the end of the scene you wish to dub audio. Thecamcorder will automatically stop audio dubbing at that point.You can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjustthe balance of both sounds.1. Press the 12bit AUDIO OUT button on the wirelesscontroller.• The setting changes with each press of the button.• STERE01: Playsback the original sound.• STERE02: Playsback the added sound.• MIX/FIXED: Plays back stereo 1 and stereo 2 in the same level.II AIII• MIX/VARI.: Playsback stereo 1 and stereo 2. The mix balance can be adjusted.2. If you have selected [MIX/VARI.], adjust the mixbalance with the ST-lIST-2 buttons on the wireless ._ocontroller.• A bar showing the balance appears for 4 seconds.• Pressthe ST-1button to increase the volume of Stereo 1 and the ST-2button toincrease the volume of Stereo 2.The camcorder resets to [STERE01] when you turn the camcorder off. However,the mix balance is memorized by the camcorder.mu_107