16S T E P 1Positioning OriginalsPlace the original you intend to scan on the scanner's document glass (platen).ProceduresPlace the original on the scanner's document glass.Open the cover and set the original face down on the scanner’s document glasswith the top edge at the front of the scanner. Align the original’s corner with thealignment mark.Close the cover carefully so the original does not shift out of position.Caution• Be careful not to dirty the document glass when placing items on it.• If an original has distinct horizontal or vertical lines, you should try toposition it on the document glass as squarely as possible to have the linesappear straight.• The maximum scanable size is the area of the entire document glass.• Straighten out curls or folds in originals before placing them on thedocument glass.Alignment MarkTop Edgeof theDocumentBottomEdge of theDocument
